Last updated March 10,
2006
|
|
| Quality Control |
 |
| Quality
control is the most important
part in the production. There
are two QC at that end of every
soldering line and component insert
line respectively to make sure
the right location of component,
to check the welding point, to
clip the extra pin for better
outlook; and every PCB will be
inspected in this way. |
 |
There is are two
QC at the middle and end of every
packing line responsible for input
voltage, AVR range, charging voltage,
inverter voltage, shutdown voltage
and etc in compliance with the
standard specified.
The Sinewave waveform checking
is done on high frequency series
UPS as all high frequency series
UPS have pure Sinewave output
|
 |
| Before packing, all UPS will
undergo the discharging testing,
charging testing (testing for
8 hours), dynamic testing ( All
UPS will be switched on and off
for five times in every minute,
controlled by software, lasting
for one hour). |
 |
| ?
QC/Technical Support |
| We have obtained the ISO
9001 approval and CE certificate.
Every procedure from raw
materials warehousing, component
inserting, performance testing
of PCB, finished UPS performance
testing to UPS ageing testing
is under strict quality
control. We always guarantee
the best quality and service
to our clients. |
| |
| ?
QC Staff |
| 10 to 19 |
| |
| ?
Standards & Approvals |
ISO 9001, CE |
| |
| ?
Materials/Components |
| We mainly import electronic
component from Japan and
U.S.A, such as HITACHI capacitor
and NICHICON capacitor to
make sure the stability
of our UPS. |
| |
| ?
Procedures/testing Details |
| Our QC department carries
out quality control according
to stringent standard. It
consists of different posts
inclusive of IQC, QC, IPQC,
QA and QE, each of which
is in charge of related
procedure to examine all
materials, semi-finished
products and finished products.
|
| |
| ?
Other Information |
| As a holder of ISO 9001
approval and CE certificate,
we guarantee to produce
high-quality products under
advanced standards for our
clients. |
|
|
| |
|
| Shante
Zhuhai Electronics Co., Ltd. |
| Tel: +86-757-86369105 |
Add: 2nd Floor,
H Building, Beiyue Industrial
Zone, Guicheng Nanhai, Foshan
City, GD China
Postal code: 528000 |
| |
| Key Contact: |
| |
| James |
| General Manager |
| E-mail:james@maxiups.com |
| Mobile：+8613923273922 |
| |
| Website |
| http://www.hyde-exp.com |
| |
|
|
Copyright ? 2006 ATAUPS.COM
Copyright ? 2006 ATAUPS.COM All rights reserved. Reproduction
in whole or in part in any form or medium without the
express written permission of ATAUPS.COM and ATAUPS.COM
is prohibited. |
|
